|
Who's Online
There currently are 5398 guests online.
|
Categories
|
Information
|
Featured Product
|
|
|
|
|
There are currently no product reviews.
;
Superb! It's the original manual. We can now use our old calculator with its full function.
;
This is a very well written and comprehensive manual. It answered all our queries.
;
Excellent copy that was delivered within 12 hours and solved my problem.
;
I did not have the manual for a Whirl Pool gas dryer, therefore I purchased it from Owner-manuals. This is exactly what I needed. Thank you for the service.
;
I was so pleased to get the owner`s manuel within one hour! Thanks again.
Regards
Werner
MICROWAVE OVEN CONTROL
Display
When power is first supplied to the microwave oven, a �:� will blink on the display. Touch OFF/CANCEL to stop the blinking. If the �:� blinks on the display at any other time, a power failure has occurred. Touch OFF/CANCEL and reset the clock if needed. If �RETRY� blinks on the display for 1 second, an invalid value has been entered. Retry your entry. When the microwave oven is in use, the display shows cooking power, quantities, weights and/or prompts. When the microwave oven is not in use, the display shows the time of day or Timer countdown.
Start/Enter
The START/ENTER pad begins any function. If not touched after touching a pad, �START?� will appear in the display. If cooking is interrupted, touching START/ENTER will resume the preset cycle.
Off/Cancel
The OFF/CANCEL pad clears any incorrect command and cancels any program during cooking. It will not erase the time of day. The microwave oven will also turn off when the door is opened. Close the door and touch START/ENTER to resume the cycle.
Number Codes
The microwave oven is preset with shortcut number codes. A number code includes one or more of the following: cooking power, cook time and food quantity or weight. See the charts in the �Cooking� and/or �Reheating� sections for additional information.
Clock
This is a 12-hour clock and does not show a.m. or p.m.
To Set:
The microwave oven and timer must be off. 1. Touch CLOCK. 2. Touch the number pads to set the time of day. 3. Touch CLOCK or START.
To Remove:
1. Touch CLOCK. 2. Touch 0. 3. Touch CLOCK. The time will disappear and �:� will appear on the display.
6
|
|
|
> |
|