Whilst this is a photo copy, and some of the pages are a little askew, it was all readable and intact. A real bonus finding an old manual for a classic piece of kit that no other site had.
Great stuff.
The manuel was exactly what I needed and I received it promptly. Thanks
Text excerpt from page 44 (click to view)
Selecting the Output Tray
To open the rear output tray:
1
Open the rear door by pulling it down. The cover functions as the output tray.
2
Pull the extender to extend the output tray to its full-length position. This will allow the tray to hold longer paper.
3
If you do not want to stack the printed pages on the rear output tray, slide the extender back into place and close the tray. The pages will then stack on the top output tray.
Note: The capacity of the rear output tray is
the same as that of the Multi-Purpose Tray. If the tray is overloaded with printed pages, it may fall from the printer. Remove the pages so that the tray is not overloaded.
