|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
;
Well Well Well!!!! Good manual perfect for my hobby!!! As Before you have done a very well done work!!!! Thank you
;
Super nice! Good to have a manual in digital format.
;
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
;
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
KeyCard theft protection system
This car radio includes one KeyCard as standard equipment, but it can also be operated with a second card. If you have lost your KeyCard or if it was damaged, you can buy a new one from your specialised dealer. If you use 2 KeyCards, the settings stored on the first card will be transferred to the second. However, you can store the following functions individually for each card: Preset button assignments, bass, treble, balance and fader settings, Loudness, TA (traffic announcement volume), beep volume, LOW-EQ, HIGH-EQ. In addition, the settings which are activated before you switch the radio off, such as the waveband, station, TA priority, AF, REG ON/ OFF, SCANTIME, seek tuning sensitivity, VOL FIX and SHARX will also remained stored. This ensures that you will find your basic settings re-adjusted automatically as soon as you have inserted your KeyCard.
Operating the unit
� Turn on the set. With the KeyCard tongue protruding out of the unit, insert the KeyCard into the slot with the contact area facing up in the middle of the area. The car radio is now ready for operation. If a wrong KeyCard is inserted, then �CARD ERR� will appear in the display. In this case please do not make any further adjustments. The system will switch off by itself after approximately 10 seconds. If another card type is inserted (e.g. phone or credit card), the display will show �WRONG KC� for approximately 2 seconds. Remove the wrong card and insert the correct KeyCard. After the display indications �CARD ERR� or �WRONG KC�: � Press ON to turn on the set.
�Training� a second KeyCard/ Replacing a KeyCard
When the unit is operated with the first KeyCard, you can �train� a second one which can also be used with the set. To �train� a second KeyCard: � Insert the first KeyCard and turn on the set. � Press the DSC button and select �LEARN KC� by pressing / .
� Press << or >>. The display will switch to �CHANGE�. � Remove the first KeyCard and insert the new one while �CHANGE� still appears in the display.
After the display indication �READY� or �LEARN KC�, � press DSC. Now you can also use the new KeyCard to operate your car stereo. A maximum of 2 cards can be used for the set. If you attempt to �train� a third one, the access authorisation for the KeyCard not used for the �training� process will be deleted automatically.
PORTUGU�S ESPA�OL SVENSKA NEDERLANDS ITALIANO FRAN�AIS ENGLISH DEUTSCH
Removing the KeyCard
� Pull the KeyCard forward and remove it.
37
|
|
|
> |
|
