|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
;
Very happy to find this from owners-manual.com and the enclosed spec sheet as well.
Not longer available from Sony.
;
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
;
Perfect. Very good service and very good scanning quality. All sheets are very legible. Thank's
;
My first manual from Owner-Manuals.com but not the last! I am very satisfied with the easy ordering and promt delivery of a manual I did not find anywhere else.
Quick Tour
â� Selecting the send/return effect patch
8.
To return to the main screen, press the [EXIT] key.
1.
From the main screen, press the [SEND/ RETURN] key in the effect section. The display changes as follows. From this screen, you can select the send/return effect patch.
HINT
If no recording track is selected, you can apply the insert effect to the input signal.
SEND VoChorus
Patch name
0
Patch number
4.3 Applying the insert effect to a track
You can apply the insert effect to the output of any track (audio track or drum/bass track), so that it post-processes the output signal of the track.
2.
Turn the dial to select the patch.
The send/return effect has 60 patches (of which 40 are preprogrammed).
1.
HINT
In the default condition of a project, the send level for the send/return effect is set to zero for each track. Therefore you need to raise the setting to verify the sound produced by the effect.
From the main screen, press the [INPUT SRC] key in the effect section. The currently selected insert location appears on the display.
3.
To return to the main screen, press the [EXIT] key.
IN SRC IN
2.
Use the status keys or turn the dial to bring up the track to which you want to apply the insert effect on the second line of the display. The status key of the selected track lights up.
â� Adjusting the send/return effect intensity
4.
From the main screen, press the [TRACK PARAMETER] key in the display section, and then use the cursor left/right keys or the status keys to select the track for which you want to adjust the send level. Use the cursor up/down keys to bring up the indication �EFX SEND� onto the second line of the display.
IN SRC TR1
HINT
If required, you can use the effect on two mono tracks. To do this, press the status keys for an odd-numbered and evennumbered track together, or turn the dial to select a mono track x 2 as insert target (TR 1/2, TR 3/4).
5.
In this condition, you can adjust the send level for the track.
TR4 EFX SEND
6. 7.
3.
0
Send level value
Press the [INSERT EFFECT] key in the
effect section. The screen for selecting the insert effect algorithm/patch appears.
While playing the song, turn the dial to adjust the send level value for the track. Adjust the send level for other tracks in the same way.
28
ZOOM MRS-8
|
|
|
> |
|
