|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It was easy done, and I got exactly what I was looking for.
;
The manuel was exactly what I needed and I received it promptly. Thanks
;
Thanks to Owner-Manuals.com! This manual was exactly what I needed. As Amana was purchased by Maytag and later by Whirlpool, there was no way to receive it from their websites. I was lucky to find this resource.
 ;
Great to be able to set channels again, on an old but stoll fine working TV
;
Good quality instructions manual. Very useful to me. Quick and excellent service from Owner-Manuals... Thanks !!!
TROUBLESHOOTING
No Power � Check the TV power cord. Unplug the power cord, wait 10 seconds, then reinsert the plug into the outlet and push the POWER button again. � Check that the outlet is not on a wall switch. � Be sure the fuse is not blown on the AC power strip if one is being used. No Picture � Check the antenna connections. Are they properly secured to the TV's ANT 75� plug? � Check the TUNER MODE control for the correct tuner setting. � Try running the Auto Program feature to find all available channels. No Sound � Check the VOLUME buttons. � Check the MUTE button on the remote control. � If you�re attempting to hook up auxiliary equipment, check the audio connections to the TV from the other device. Remote Does Not Work � Check the batteries. If necessary, replace them with AA Heavy Duty (Zinc Chloride) or Alkaline batteries. � Clean the remote control and the remote control sensor on the front of the TV. � Check the TV power cord. Unplug the power cord, wait 10 seconds, then reinsert the plug into the outlet and push the POWER button again. � Be sure the fuse is not blown on the AC power strip, if one is being used. � Check to be sure the power outlet is not on a wall switch. TV Displays Wrong Channel or No Channels Above 13 � Repeat channel selection. � Add the desired channel numbers (using the CHANNEL EDIT control) into the TV�s memory. � Check to be sure TUNER MODE is set to CABLE if you have Cable TV service. Run the Auto Program feature to find all available channels. Channels 1-125 can be possible only if you have Cable TV service. If you are using an Antenna, only channels 2-69 can be possible.
34
|
|
|
> |
|
