Very satisfied! I was searching for several days, but nope; till I discovered your webside and there it was at a very reasonable price. Keep up the good work!
Paul
Flanders
Generally speaking good copy; a few pages too hard contrast...
Good service and communication.
Text excerpt from page 7 (click to view)
2. How to set the programmer
Program On Light
A U T O
Automatic Operation Light
A button: Minute Minder Acoustic Signal Off B button: Cooking Time
-+
KNOB (E)
BCDE
C button: End of Cooking
D button: Manual Operation
SETTING THE TIME OF DAY (24 H CLOCK)
Press buttons A and B at the same time and while turning knob E enter the time of day.
COOKING TIME
A U T O
-+
MANUAL OPERATION
-+
Press button B and while turning -+ knob E enter the required time. The "AUTO" signal will appear on the right hand side of the clock. Then, select the required temperature and the oven function. When cooking is completed, an audible signal will be heard for approximately 2 minutes. To cancel press button A and return control and thermostat knobs to the OFF position.
To set oven for manual operation, press button D.
SETTING THE AUTOMATIC TIMER
Press button B and while turning knob E enter the required cooking time. Then press button C and while turning knob E enter the end of cooking time. Turn the thermostat and function control knobs to the required settings. The oven
-+
A U T O
-+
SETTING THE MINUTE MINDER
Press button A and while turning knob E enter the required time (maximum 23 h
A U T O
temperature light nor oven light
-+
59 min.) After required time has been selected the clock will revert to the time of day. When time is up an audible signal will be heard for approximately 2 minutes. To cancel press button A and return control and thermostat knobs to the OFF position.
will not come on until the oven switches on. When cooking is completed, the "AUTO" signal will flash an audible signal will be heard for approximately 2 minutes. To cancel press button A and return control and thermostat knobs to the OFF position.
In case of loss of power, all the settings (time of day, setted programs or programs in operation) will be cancelled. When the power is restored, the numbers on the display will flash, and the timer has to be reset.
