It's great to be able to obtain a precious technical information for a real old equipment. The one I got helps me a lot in the area of wiring diagram to repair my antique. PDF gave me clear enough information to find out thr details. Thanks for giving me the oppotunity to be able to access to almost vanished informations.
Good quality for the scan, complete, but as usual for Tascam, not so comprehensive !
Text excerpt from page 9 (click to view)
MSW-1
EXPLODED VIEW
14
1
2
3
4
13
5
6
12
15 11 9
10
TO SERVICE THE MSW-1 SUBWOOFER 1) Remove the grille. 2) Extract (6) rubber grille retainers as shown in the illustration above, this can be accomplished by carefully pulling them out of the cavities with long-nosed pliers or similar tool. 3) Remove the (6) Phillips screws that are now exposed. 4) Remove the front baffle. 5) Remove the (8) screws that secure the driver. 6) To service the amplifier, remove the (10) Phillips screws at the rear of the enclosure, and pull the amplifier out of the back.