perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Super nice! Good to have a manual in digital format.
Text excerpt from page 25 (click to view)
mvr630mg.QX33
2/11/02
12:05 PM
Page 25
Recording 25
Read and follow the steps below to record a television program.
1 2 3 4 5 6 7 8
Turn on the TV and set it to channel 3 or 4 - the channel to which the CH3/CH4 switch on the back of the VCR is set. Insert a tape with its record tab intact in the VCR. If playback begins, press the STOP/p button to stop the tape. If the VCR/TV light appears on the display panel, go to step 4. If the VCR/TV light does not appear, press the VCR/TV button once.
1 2
Turn on the TV. Insert a tape in the VCR.
3 8
1 4 7
POWER
VCR/TV
EJECT
PLAY F.FWD STOP
CLEAR
Press the SPEED button repeatedly until the desired tape speed (SP or SLP) appears briefly on the screen. (Details about tape speed are on page 30.)
MENU
REW
5 7
STATUS/EXIT
2 5 8 0
3 6 9
CH
Use the CH(annel) o/p button or the Number buttons to select the channel you want to record.
4 6
SPEED
TIME SEARCH STILL/PAUSE MEMORY SLOW
REC/OTR
Press the REC(ord)/OTR button once to start recording. The RECORD light will appear on the display panel.
To pause the recording, press the STILL/PAUSE button once. The RECORD light will flash. To resume recording, press the REC(ord)/OTR button or press the STILL/PAUSE button again. The RECORD light will come on again.
Helpful Hints
� If you press the REC(ord)/OTR button when a tape is not in the VCR, NO CASSETTE will flash on the screen. � If you press the REC(ord)/OTR button
To stop recording, press the STOP/p button.
� � � �
while a tape without a record tab is in the VCR, the VCR will eject the tape and PROTECTED CASSETTE CANNOT RECORD will flash on the screen. For recording options, see pages 26-32. You can change the tape speed during a recording, but some distortion will appear on the tape. The VCR records in a preset volume. If you used the AUDIO and VIDEO OUT jacks to connect the VCR to the TV, see page 10. You need to choose
a channel other than 3 or 4 at the TV to see the VCR image on your TV.
