|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
It is perfect, exactly what we needed. It's like the paper version but less clutter.
 ;
Received my manual within 24 hours. Very clear scan of the manual I needed. Thanks!
;
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
;
Immediate response with excellent service - highly reccommended
;
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
Changing the volume level You can change the speakers� sound distribution to suit your surround sound needs. q Press CENTER +/- to adjust the level of the center speaker. � �CNT +XX DB� is displayed. q Press REAR +/- to adjust the level of the rear surround speakers. � �RE +XX DB� is displayed. Note: � �XX� denotes the volume level between -15db to 10db.
System Setup (DVD)
The system setup is carried out via the TV, it enabling you to customize the DVD system to suit your particular requirement. If the preferred options selected are not available on a disc, then the disc�s own preference will be used. IMPORTANT ! To access the System Setup menu, playback must be stopped. General operation
English
12
1 Press SYSTEM MENU. 2 3 Use 1 2 34 keys to toggle through the functions and 4
select your preferred option. Press OK to confirm a highlighted selection. or OK. � icon will be highlighted in the menu bar on the TV screen. Press 4 to activate the System Setup menu.
Setting up the subwoofer
1 Use the supplied subwoofer cable to connect the
subwoofer�s audio input jack to the WOOFER LINE OUT of the DVD system.
2 Connect the subwoofer�s AC power cable to the wall
socket and switch on the power.
3 Rotate the VOLUME knob at the front panel of
subwoofer until you hear a click, clockwise to switch on and counterclockwise to switch off. � The LED indicator will light up in green when the subwoofer is switched on.
5 To exit the System Setup menu, press SYSTEM MENU
The following items are available : Setting the picture
4 Select the phase polarity at the rear of the subwoofer at
either 0o or 180o to determine better bass reproduction effect in certain listening environment.
5 Press SUBW +/- to adjust the volume level of the
subwoofer (-15dB to 10dB). � �SUB +XX DB� is displayed.
� TV Shape Select the aspect ratio of the TV to be connected. 4:3 PS (default setting) � If you have a conventional TV set and your DVD is not formatted for widescreen viewing, use this setting. A wide picture is displayed on the whole TV screen with a portion automatically cut off. 4:3 LB � If you have a conventional TV set and your DVD is formatted for widescreen viewing, use this setting. Wide bands will be displayed on the upper and lower portions of the TV screen. 16:9 � If you have a widescreen TV set, use this setting (you must also set your widescreen TV to �full size�).
PREPARATIONS
12 4/18/02, 5:55 PM
pg 01-25/MX36-37xx/37-Eng
|
|
|
> |
|
