|
There are currently no product reviews.
 ;
Good quality service manual.The scheme is on A3 format and very readable.Thank you
;
Very good service-manual with clear electrical diagrams. Thanks you.
 ;
the manual is in quite good quality and it's in pdf. manual was send in less then 6h.
;
Absolutely top, I've got now all Service-Manuals I'll need to repair my Mackie-Mixer!
;
The service manuel is very helpful, we where able to restore the device to its working operation again.
(9)
1) 2) 3) 4)
Take-up belt, paper exit roller
Remove the inner finisher from the main unit. Refer to A-(1). Remove the inner cover. Refer to A-(2). Remove the reverse guide unit. Refer to A-(5). Remove the parts, and remove the bundle roller up/down lever unit.
7)
Remove the parts, and remove the take-up belt and the paper exit roller.
3
1
2 1
2
2
1
5) Remove the parts, and remove the bundle roller unit.
2 1
2
3
1
1
(10) Inlet port gate
1) 6) Remove the parts, and pull out the belt unit. Remove the parts, and remove the belt unit. 2) 3) 4) 5) 6) 7) Remove the inner finisher from the main unit. Refer to A-(1). Remove the inner cover. Refer to A-(2). Remove the left cover and the bottom cover. Refer to A-(4). Remove the reverse guide unit. Refer to A-(5). Remove the PWB. Refer to F-(1). Remove the flapper solenoid. Refer to B-(2). Remove the slide rail. Remove the slider fixing bracket and remove the earth terminal.
3 1
3 2
1
2
MX-FNX1/MX-PNX1 DISASSEMBLY AND ASSEMBLY 6 � 4
 $4.99 MX-FNX1 SHARP
Parts Catalog Parts Catalog only. It's available in PDF format. Useful, if Your equipment is broken and You need t…
|
