|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Awesome manual. Complete diagrams of all board assemblies as well as how to get to each part of the t.v. down to the individual screws and their locations. Get it.
;
perfect copy, im very satisfied, i was need the diagram over the powersupply and
the copy was very sharp
;
This is exactly the service manual I needed.
Complete with all schematics, partslists, PCB layouts and alignment instructions.
This manual covers both the T-4970 en T-488F Onkyo tuner.
 ;
IF PRINTED CIRQUIT BOARD WIRING VIEW WAS ONE TONE LIGHTER, THEN 5 STAR RANK HAS TO BE MY CHOISE.
;
Very usefull, good quality drawings !
Muito útil encontrei todas as informações necessárias.
MX-J970V/MX-J980V Removing the rear cover / rear panel (See Fig.26 to 29)
Prior to performing the following procedure, remove the tuner board, input / output board and the fan motor assembly. There is no need to remove the front panel assembly. 1. Remove the two screws W attaching the rear cover on the back of the body. 2. Remove the five screws E & F, G attaching AUX, main speakers and sub woofers terminals to the rear panel on the back of the body.
Rear cover
Rear panel
W
3. Remove the five screws X attaching the heat sink and the preamplifier board to the rear panel on the back of the body. 4. Remove the two screws Z attaching the voltage selector terminal to the rear panel on the back of the body. 5. Remove the screw Y attaching the rear panel to the base chassis on the back of the body. 6. Release the two joints k and l on the rear panel bottom using a screwdriver, and detach the rear panel backward.
Fig.26
Heat sink
E X F G X Y
Fig.27
X Z
X
Rear panel Rear panel Base chassis Joint l Base chassis Joint k
Fig.29
Fig.28
1-15
|
|
|
> |
|
