The service manual when downloaded and printed out was clear and easy to read. The manual is complete with the schematic diagram and technical data. I occasionally require a manual and now having registered with this company I shall order from them in the future.
Hello from Germany - thank you very much for the manual for my Sharp "Searcher" - the handling of your internet area is outstanding..Mike
Text excerpt from page 150 (click to view)
English
Adjusting the Front Speaker Output Balance
Remote ONLY
2 Enter into the SEA Control Mode.
� You can enter the SEA Control Mode only while the Sound Mode appears on the display.
TITLE
You can adjust the output balance of left front speaker and right front speaker within the range of R (right) �6 (minimum sound level from the right speaker) to L (left) �6.
SET /DISPLAY
1
L/R BALANCE L R
2
Decreases the left front speaker output level. Decreases the right front speaker output level.
TITLE
(holding then...)
3 Adjust the SEA pattern.
1 Select one of the tone�BASS or TRE (treble).
PRESET
Selecting the Sound Modes
You can select one of the preset Sound Modes. 2 Adjust the level of the selected tone. � You can adjust the bass and treble level from �3 to +3. 3 Repeat steps 1 and 2 to adjust the level of the other tone. SEA (Sound Effect Amplifier) modes ROCK POP CLASSIC User modes USER 1/2/3 Boosts low and high frequency. Good for acoustic music. Good for vocal music. Good for classical music. Your individual mode stored in memory. See the next column �Creating Your Own Sound Modes�User Mode.� No Sound Mode effect.
TITLE
TUNING
ROCK FLAT
POP
CLASSIC
4 Finish the SEA pattern setting.
SET
/DISPLAY
4 Select one of the User Modes.
PRESET
FLAT
Creating Your Own Sound
Main Unit ONLY
INFO
5 Finish the setting.
/DISPLAY
SET
Modes�User Mode
You can create your own Sound Modes to make sounds suit your taste. The changed settings can be stored as the USER 1, USER 2 and USER 3 modes.
TITLE
1 Select one of the preset Sound Modes.
SOUND MODE
