perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Super nice! Good to have a manual in digital format.
Text excerpt from page 14 (click to view)
English
Common Operations
Turning On or Off the Power
To turn on the unit, press STANDBY/ON so that the STANDBY lamp goes off.
STANDBY STANDBY/ON
3 Press
4 or ¢ to adjust the minute, then press SET.
PRESET PREV NEXT
SET
To turn off the unit (on standby), press STANDBY/ON again so that the STANDBY lamp lights up.
STANDBY STANDBY/ON
To check the clock time
Press DISPLAY while playing any source. � Each time you press the button, the source indication and the clock time alternate on the display.
DISPLAY
A little power is always consumed even while the unit is on standby. To switch off the power supply completely, unplug the AC power cord from the AC outlet.
To adjust the clock again
If you have adjusted the clock before, you need to press CLOCK/TIMER repeatedly until �CLOCK� is selected. � Each time you press the button, the clock/timer setting modes change as follows:
DAILY Canceled ON TIME CLOCK REC ON TIME
When you unplug the AC power cord or if a power failure occurs The clock is reset to �� �:� �� soon, while the tuner preset stations (see page 12) will be erased in a few days.
Setting the Clock
Before operating the unit any further, first set the clock built in this unit. You can set the clock whether the unit is on or off.
If there is a power failure The clock loses the setting and is reset to �� �:� �.� You need to set the clock again.
On the unit ONLY: 1 Press CLOCK/TIMER.
CLOCK / TIMER
The hour digits start flashing on the display.
2 Press 4 or ¢ to adjust
the hour, then press SET.
PREV
PRESET NEXT
SET
� If you want to correct the hour after pressing SET, press CANCEL. The hour digits start flashing again.
