|
There are currently no product reviews.
 ;
perfect copy, im very satisfied, i was need the diagram over the powersupply and
the copy was very sharp
;
This is exactly the service manual I needed.
Complete with all schematics, partslists, PCB layouts and alignment instructions.
This manual covers both the T-4970 en T-488F Onkyo tuner.
 ;
IF PRINTED CIRQUIT BOARD WIRING VIEW WAS ONE TONE LIGHTER, THEN 5 STAR RANK HAS TO BE MY CHOISE.
;
Very usefull, good quality drawings !
Muito útil encontrei todas as informações necessárias.
;
Wanting to repair a neighbours tape recorder I needed the necessary information, it makes it easier. Although the service manual is described as "Language : English" To my dismay I found that it is entirely written in German, a language I do not understand. At least I now have the schematics which will help of sorts. I may not use this service again due to the laguage difficulty after all when it states English you do not expect it to be entirely in another language.
3.2.14 Removing the power amp and supply board and the power trans board (See Fig. 3, 28 to 28) � Prior to performing the following procedures, remove the top cover and CD changer unit. Fuse (F901) (1) Remove four screws B from the rear panel. (Fig.3) 1.6AL 250V (2) Pull the heat sink cover outward. (3) Remove four screws AA from the rear panel between the heat sink holder. (4) Remove four screws YY that retains the rear panel, and then remove the rear panel. (5) Disconnect the parallel wires from the connectors FW951 on the power trans board. (6) Remove screws Z that retain the power amp and supply board and then remove the assembly. (7) Remove the clamp of AC power cord from the chassis. (8) Remove four screws that retain the power trans board and then remove the assembly.
Fig.28
YY
Clamp
Fig.29
Rear panel
Power amp and supply PCB
Z
Fig.30
Chassis
(No.MB394)1-17
 $4.99 MX-KC2 JVC
Owner's Manual Complete owner's manual in digital format. The manual will be available for download as PDF file aft…
|
