|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
- Very good scan quality, PERFECT!
- Sehr gute scan Qualitaet, empfehlenswert!
Wolfgang Sundhaus
 ;
Good site, works ok and you get what you order, no problems experienced, got my manual within a day. A++++
;
Original well scanned manual. Got the job done. Microwave problem found & corrected. For $5 and a new magnitron from ebay, it was a cheap and good the first shot fix. Electrical schematics allowed me to mage sure every thing else was ok before cutting and order for parts. Hard to live without.
;
I was very skeptical of this website, I have never downloaded manuals before. I put it on the AMEX and payed through Paypal to ensure protection. I got the manual exactly as described and now I can replace the filter capacitor for this amp. Great Price, others selling for 12.99 or more and this is the same manual. I will search out this website for other manuals. Thank you
;
Manual was reasonably easy to follow. I am not an engineer or know much about electronics but with the manuals help I was able to figure out the problem, identify the part required for the repair. Replacement part cost around $30. Whilst replacing the part I was telling myself, "this aint gonna work cos it seems far too easy". Took about 15 minutes to do and my plasma TV works a treat. Would never have been able to do this without the service manual.
CA-MXS6MDR SP-MXS6MD
<Traverse mechanism assembly> Removing the Insulators (See Fig.16)
1. Disengage the four insulators from the notches of the traverse mechanism chassis.
Pickup unit Insulators
Insulators Traverse machanism chassis
Fig.16
Removing the pickup unit (See Fig.17)
1. Turn over the traverse mechanism assembly and remove the screw J attaching the shaft holder (F). 2. Move the shaft inward and remove it from the shaft holder (R). 3. Detach the shaft side of the pickup unit upward and release the joint h with the pickup guide. Then remove the pickup unit with the shaft.
Joint h
Pickup guide
Pickup unit
Shaft holder (R)
Shaft holder (F)
J
Fig.17
K
Removing the pickup (See Fig.18)
1. Draw out the shaft from the pickup. 2. Remove the two screws K attaching the rack spring.
Rack spring Pickup
Shaft
Fig.18
1-17
|
|
|
> |
|
