|
There are currently no product reviews.
 ;
This manual is complete and of high quality. I am very pleased with the purchase.
;
Another excellent buy! A fully readable PDF archive. Good prints!!
;
It is wonderful done!!! a great job in scanning the manual. Superior quality in all the electric scheme. Very understandable and net!!! Thank you!
 ;
muy buen manual por lo completo de este algunos esquemas estan muy divididos lo que hace algo dificil el seguimiento.
;
very good manual, with detail and clarity in esquematic diagrams and waveforms .
Service Hints - Replacing the CD Drive
1. Loosen screw A 2. Remove cover as shown in picture 1
10-4 Attention: The laser diode of this CD drive is protected against ESD by a solder joint which short-circuits the laser diode to ground. For proper functionality of the CD drive this solder joint must be removed after connecting the drive to the set.
picture 1 3. Loosen screw B (see picture 2) 4. Open slot loader
Don�t forget to fix the flat-foil again. Pay attention in the wiredressing. (see picture 4)
picture 4 picture 2 5. Loosen 3x screw C (see picture 3) 6. Disconnect wire D and flex-foil E Attention: Flex-foil E is fixed to the printed circuit board with a double-sided adhesive tape.
Mount the upper part of the slot loader. Pay attention in the wire-dressing.
picture 3
picture 5
|
