|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Even if the PDF is a scan, I can read the information I need.
The price is affordable and the service (mail sending) is very fast.
Thanks ! Regards. William (Fan of Kenwood)
;
Very good quality original datasheet!I like this amazing website!!!!!!
 ;
Excellent just what I needed to replace the electrolytic caps and make this old gem a beauty again. Was as scan of the original photocopied service manual.
;
It was helpful to get schematic with waveforms in important points and lot of service information. Manual is good quality, fast delivered. Of course it is hardcopy of paper one with all its disadvantages.
;
I want to give you a real heads-up for your desire to enable such people as I to acquire the information I need to maintain the older types of equipment such as this Akai HXA351W. You do a swell job with all the processes you have to perform so I can have a legible, thus usable
document which does not send me crazy trying to figure out the blurry text of a bad copy.
Very well done, Thomas.
Service Hints - Replacing the CD Drive
1. Loosen screw A 2. Remove cover as shown in picture 1
10-4 Attention: The laser diode of this CD drive is protected against ESD by a solder joint which short-circuits the laser diode to ground. For proper functionality of the CD drive this solder joint must be removed after connecting the drive to the set.
picture 1 3. Loosen screw B (see picture 2) 4. Open slot loader
Don�t forget to fix the flat-foil again. Pay attention in the wiredressing. (see picture 4)
picture 4 picture 2 5. Loosen 3x screw C (see picture 3) 6. Disconnect wire D and flex-foil E Attention: Flex-foil E is fixed to the printed circuit board with a double-sided adhesive tape.
Mount the upper part of the slot loader. Pay attention in the wire-dressing.
picture 3
picture 5
|
|
|
> |
|
