|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
the manual is in good quality and it's in pdf. manual was send in less then 24h.
regards
mike
;
I would not plug this machine in without finding a manual like this. In addition to setup and normal operating instructions, it has troubleshooting flowcharts, diagrammed mechanical adjustments, and schematics to beat the band. The tech I hand it to would be thrilled to find solder side PCB diagrams with component outlines superimposed, pinouts for every IC chip, and line drawings of transistors, with labeled legs.
As for printing quality, this may be a copy of a copy, but even the finest print when enlarged is very legible. There is a bit of grayed print over a few pages, as if a wet page were placed over it, but the print is still very legible. If you could borrow an original manual and get it printed and bound for 4 to 6 times the cost, you could get better quality. In that case you wouldn't be here. For price, utility, and availability I am rating this manual highly.
;
I received the Manual in a timely manner and it was exactly what I needed.
This is a perfect copy of the Service Manual, The quality is great. I am very
happy. Thank you
;
exactly as they say. Within 24 hours the link to the pages and offcourse it was the right service manual. Super and thanks
 ;
The manual was exact the thing that was promised. My old car stereo is working again thanks to the information supplied.
MZ-M100
Example of Calculation:
Result Item No. 0211 0212 0213 0214 0215 0216 Parameter Pr_nominal 2.48 mW Decimal 50 30 147 40 38 116 Hexadecimal 32h 1Eh 93h 28h 26h 74h
Kr �0.3 %/°C Pw_nominal 7.35 mW Kw �0.4 %/°C Prmin Pwmin 1.9 mW 5.8 mW
3-5-3. Other setting Procedure: 1. Enter the test mode (Display Check mode). 2. Press the [VOL+] key to enter the Manual mode. 3. Press the [VOL+] key once and press the > key five time to select the item number 1113 and display as follows.
Display of the remote commander
113 SS**$$##
adjustment value (hexadecimal)
Procedure: 1. Enter the test mode (Display Check mode). 2. Press the [VOL+] key to enter the Manual mode. 3. Press the > key once, press the [VOL+] key once, and press the > key once again to display as follows.
Display of the remote commander
210 DiscPr
4. Press the > key once to select the item number 0211. 5. Adjust with [VOL+]/[VOL--] keys so that the adjustment value of LCD becomes calculated value. 6. Press the X key on the set or � key on the remote commander to write the adjusted value. 7. Press the > key to next item. 8. Repeat adjustment from step 4 until item number 0216. 3-5-2. Destination setting Procedure: 1. Enter the test mode (Display Check mode). 2. Press the [VOL+] key to enter the Manual mode. 3. Press the > key five time to select the item number 0113 and display as follows.
Display of the remote commander
113 DistFL **
adjustment value (hexadecimal)
4. Adjust with [VOL+]/[VOL--] keys so that the adjustment value of �**� on the LCD becomes �1A�. 5. Press the X key on the set or � key on the remote commander to write the adjusted value. ($$ blinks and disc mark rotates on the LCD) 6. Adjust with [VOL+]/[VOL--] keys so that the adjustment value of �$$�on the LCD becomes �20�. 7. Press the X key on the set or � key on the remote commander to write the adjusted value. (## blinks and disc mark rotates on the LCD) 8. Adjust with [VOL+]/[VOL--] keys so that the adjustment value of �##�on the LCD becomes �94�. 9. Press the X key on the set or � key on the remote commander to write the adjusted value. 10. Press the [VOL+] key once to change the adjustment value of �**� on the LCD into �1B�. 11. Press the X key on the set or � key on the remote commander to write the adjusted value. ($$ blinks and disc mark rotates on the LCD) 12. Adjust with [VOL+]/[VOL--] keys so that the adjustment value of �$$�on the LCD becomes �F1�. 13. Press the X key on the set or � key on the remote commander to write the adjusted value. (## blinks and disc mark rotates on the LCD) 14. Adjust with [VOL+]/[VOL--] keys so that the adjustment value of �##�on the LCD becomes �1A�. 15. Press the X key on the set or � key on the remote commander to write the adjusted value. 16. Press the x key four times and back to the Display Check mode.
4. Press the [VOL+]/[VOL--] key and set the adjustment value of �**� on the LCD becomes �20�. 5. Press the X key on the set or � key on the remote commander to write the adjusted value. 6. Press the > key to select the item number 0114. 7. Press the [VOL+]/[VOL--] key and set the adjustment value of the LCD becomes �80�. 8. Press the X key on the set or � key on the remote commander to write the adjusted value. 9. Press the x key four times and back to the Display Check mode.
19
|
|
|
> |
|
