|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
;
Well Well Well!!!! Good manual perfect for my hobby!!! As Before you have done a very well done work!!!! Thank you
;
Super nice! Good to have a manual in digital format.
;
Great job supplying the manual.
Many of these products weerepretty obscure, so it was great that you had
the manual for it!
;
Great manual, would not have been able to operate my machine without it!!
James Dawson August 18, 2012
Using Auto Time Stamp to add track marks while recording
When the elapsed recording time exceeds the time interval for Auto Time Stamp:
Adjusting the recording level manually (Manual Recording)
When you record, the sound level is adjusted automatically. If necessary, you can set the recording level manually during both analog and digital recording.
REC
The recorder adds track marks at the point you set the time interval and from that point the recorder adds a track mark whenever the time interval has elapsed. Example: Eight minutes of recording has been completed when the Auto Time Stamp time interval is set to 5 minutes. A track mark will be added at the 8minute point (after the start of recording) and after each 5-minute interval thereafter.
When the time interval set for Auto Time Stamp exceeds the elapsed recording time:
>, ., X
MENU/ ENTER
The recorder adds a track mark when the set Auto Time Stamp time interval has elapsed. Example: Three minutes of recording has been completed when the Auto Time Stamp time interval is set to 5 minutes. A track mark will be added at the 5minute point (after the start of recording) and after each 5-minute interval thereafter.
z
�T� appears before the track display on the recorder for track marks added by Auto Time Stamp.
1 2 3 4
Press X while pressing REC. The recorder stands by for recording. Press MENU. Press > or . repeatedly until �RecVol� flashes in the display, and then press ENTER. Press > or . repeatedly until �Manual� flashes in the display, and then press ENTER.
Notes
� Automatic track marking by Auto Time Stamp starts when you add a normal track mark to the disc (i.e., by pressing T MARK or X, etc.). � The setting will be lost when the recording stopped.
5
Play the source.
26
|
|
|
> |
|
