|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
 ;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
;
Très-très bon site, facile, très bon prix.
Au futur besoin, je n’hésiterais à faire appel à vous.
Merci
MZ-RH10
Example of Calculation:
Result Item No. 0211 0212 0213 0214 0215 0216 Parameter Pr_nominal 2.48 mW Decimal 50 30 147 40 38 116 Hexadecimal 32h 1Eh 93h 28h 26h 74h
Kr �0.3 %/°C Pw_nominal 7.35 mW Kw �0.4 %/°C Prmin Pwmin 1.9 mW 5.8 mW
3-5-3. Other setting Procedure: 1. Enter the test mode (Display Check mode). 2. Press the [VOL+] key to enter the Manual mode. 3. Press the [VOL+] key once and press the > key five time to select the item number 1113 and display as follows.
Display of the remote commander
113 SS**$$##
adjustment value (hexadecimal)
Procedure: 1. Enter the test mode (Display Check mode). 2. Press the [VOL+] key to enter the Manual mode. 3. Press the > key once, press the [VOL+] key once, and press the > key once again to display as follows.
Display of the remote commander
210 DiscPr
4. Press the > key once to select the item number 0211. 5. Adjust with [VOL+]/[VOL--] keys so that the adjustment value of LCD becomes calculated value. 6. Press the X key on the set or � key on the remote commander to write the adjusted value. 7. Press the > key to next item. 8. Repeat adjustment from step 4 until item number 0216. 3-5-2. Destination setting Procedure: 1. Enter the test mode (Display Check mode). 2. Press the [VOL+] key to enter the Manual mode. 3. Press the > key five time to select the item number 0113 and display as follows.
Display of the remote commander
113 DistFL **
adjustment value (hexadecimal)
4. Adjust with [VOL+]/[VOL--] keys so that the adjustment value of �**� on the LCD becomes �1A�. 5. Press the X key on the set or � key on the remote commander to write the adjusted value. ($$ blinks and disc mark rotates on the LCD) 6. Adjust with [VOL+]/[VOL--] keys so that the adjustment value of �$$�on the LCD becomes �20�. 7. Press the X key on the set or � key on the remote commander to write the adjusted value. (## blinks and disc mark rotates on the LCD) 8. Adjust with [VOL+]/[VOL--] keys so that the adjustment value of �##�on the LCD becomes �94�. 9. Press the X key on the set or � key on the remote commander to write the adjusted value. 10. Press the [VOL+] key once to change the adjustment value of �**� on the LCD into �1B�. 11. Press the X key on the set or � key on the remote commander to write the adjusted value. ($$ blinks and disc mark rotates on the LCD) 12. Adjust with [VOL+]/[VOL--] keys so that the adjustment value of �$$�on the LCD becomes �F1�. 13. Press the X key on the set or � key on the remote commander to write the adjusted value. (## blinks and disc mark rotates on the LCD) 14. Adjust with [VOL+]/[VOL--] keys so that the adjustment value of �##�on the LCD becomes �1A�. 15. Press the X key on the set or � key on the remote commander to write the adjusted value. 16. Press the x key four times and back to the Display Check mode.
4. Press the [VOL+]/[VOL--] key and set the according value to each destination referring to the following table. 5. Press the X key on the set or � key on the remote commander to write the adjusted value. 6. Press the > key to select the item number 0114. 7. Repeat adjustment from step 3. 8. Press the x key four times and back to the Display Check mode.
Destination US and Canadian AEP, UK and East European E, Hong Kong, Korean, Australian and Tourist Setting value Item No. 0113 Item No. 0114 20 80 A0 24 80 80
Table 3-5-2. Destination Setting
19
|
|
|
> |
|
