HOW TO INITIALIZE THE BLU-RAY DISC PLAYER
To put the program back at the factory-default, initialize the BD player as the following procedure. 1. Turn the power on. 2. Remove the disc on the tray and close the tray. 3. Press [1], [2], [3], [4], and [DISPLAY] buttons on the remote control unit in that order. Fig. a appears on the screen.
"*******" differ depending on the models.
Version Info Model Name Version Region : ******* : *.*** : *-*
EEPROM CLEAR <STOP>
EXIT <POWER>
Fig. a
4. Press [STOP] button on the remote control unit. Fig. b appears on the screen and Fig. c appears on the VFD.
"*******" differ depending on the models.
Version Info Model Name Version Region : ******* : *.*** : *-*
EEPROM CLEAR : OK EEPROM CLEAR <STOP>
EXIT <POWER>
Fig. b
Fig. c
5. To exit this mode, press [STANDBY-ON] button.
1-6-1
E5H20INT
