|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Great service. Manual delivered at a great price. Reliable delivery service. They have a great selection. A recommended service!
 ;
I used your service and I found myself well I need service manual teac v plate 770 and I was able to access and remove the belt that erno routes. thanks I recommend it to all
;
At first I thought there had been a mix up as I required the service manual for the cassette unit and the one supplied was for the CD unit. However when I scrolled further down I realised that both had been scanned together! This enabled me to dismantle and repair the cassette unit as intended and I also have a copy of the manual for both the CD and graphic equaliser units should I ever need them. Thanks very much for a great service.
;
Excelent service, the manual is complete, very cheap and fast
Alberto
;
The item received was as described, as expected. I was pleased with the order. Thank you.
5
6
7
8
4. Procedure for checking
Display Operation Method
A
ND-BT1/E5 will be connected to the connectable product, and start. Select [Menu] [Settings] [Hardware] [Conection Status].
Make sure on the left screen that the items under Phone Connection Status are indicating [OK]. In this case, because registration of the BT telephone has not been completed, level indication of the antenna bar is not displayed even though the status is indicated as OK. * In the case of NOK, possible case is poor connection between ND-BT1/E5 and navigation product or failure of the wired section of ND-BT1/E5.
B
Select [Menu] [Info/Phone] [Registration] [Mobile].
[Phone Menu]
[Phone Settings]
Search for the Bluetooth device and enter the passkey by operating the mobile telephone. * In case the device name is not displayed in Bluetooth device search, the possible cause is the failure of the wireless section of ND-BT1/E5.
C
When the connection with the BT telephone is completed, the screen as shown on the left will be displayed. Antenna bar will be displayed on the [Conection Status] screen. When the connection is successfully established, conduct speech test and check the voice transmission and reception.
D
E
F
ND-BT1/E5
5 6
7
8
19
|
|
|
> |
|
