|
There are currently no product reviews.
 ;
I will definitely be back for more information when I need it.
;
The service manual when downloaded and printed out was clear and easy to read. I would have liked to have been able to enlarge some details, but this was not possible as the file permissions did not allow this. The service was very good. The time taken from placing my order to downloading the document was only a few minutes.
 ;
The manual is useful for trouble shooting for an old instrument. It saved money,and let me enjoy DIY.
;
Perfect source of information for replacing the HDD and performing general diagnostics.
;
Perfect source of information for replacing the HDD and performing general diagnostics.
<TUNER Adjustment> 1. VT Check (AM) Requirements � Measuring instrument: Digital multimeter Test points: VT, GND 1) Connect the digital multimeter between VT and GND. 2) Set the function to AM, and tune the receiving frequency of the unit at 1710kHz. 3) Check that the digital multimeter ranges under 9V. 4) Tune the receiving frequency of the unit at 530kHz. 5) Check that the digital multimeter ranges above 0.5V. 2. VT Adjustment and Check (FM) Requirements: Same as the above. � Adjustment point: L907 1) Connect the digital multimeter between VT and GND. 2) Set the function to FM, and tune the receiving frequency of the unit at 108.0MHz. 3) Adjust L907 so that the digital multimeter ranges at 7.0±0.1V. 4) Tune the receiving frequency of the unit at 87.5MHz. 5) Check that the digital multimeter ranges under 1.5V. 3. CLOCK Check Requirements � Measuring instrument: Frequency counter Test point: CLOCK (IC801 24PIN), GND 1) Connect the frequency counter between CLOCK and GND. 2) Set the function to AM, and tune the receiving frequency of the unit at 1710kHz. 3) Check that the frequency counter ranges at 2160kHz±45Hz.
� 39 �
 $4.99 NSXD20. AIWA
Owner's Manual Complete owner's manual in digital format. The manual will be available for download as PDF file aft…
|
