perfect! you just sent to me the copy in Italian witout even my specification!!!! so you are really smart cooperative and efficient. To my opinion the best place all over to get a manual of electronics!!!!
Super nice! Good to have a manual in digital format.
Text excerpt from page 12 (click to view)
Turning on the Movie Camera and Selecting Modes
Turn on the power first and then select modes.
ª How to Turn on the Power 1 Set the [OFF/ON] Switch to [ON].
�The [CAMERA] Lamp lights up.
ª How to Switch Modes 2 Press the [MODE] Button.
�With each press, the Mode changes. �The appropriate Mode Lamp lights up.
CAMERA VCR CARD P.B MODE OFF ON
ª How to Turn off the Power 3 Set the [OFF/ON] Switch to [OFF].
2
1, 3
Using the Viewfinder/LCD Monitor
ª Using the Viewfinder
12:30:45 12:30:45 15.10.2001 15.10.2001 12:30:45 15.10.2001
~~~~~~~~~~~~~~~~~~~~~~~~
�The Viewfinder can also be pulled out for use.
1
2
Before using the Viewfinder, adjust the field of view so that the displays inside the Viewfinder become clear and easy to read.
1 Tilt the Viewfinder upward.
�Do not pull on the Eyecup to extend the Viewfinder.
2 Adjust by sliding the Eyepiece Corrector Knob 1. ª Using the LCD Monitor
With the LCD Monitor open, you can also record the picture while watching it.
1 Press the [PUSH OPEN] Button and, at the same time, bring
the LCD Monitor out about 90o in the direction of the arrow.
�The Viewfinder goes off.
2 Adjust the LCD Monitor angle according to the desired
recording angle.
�The LCD Monitor can rotate a maximum of 180o 2 from the vertical position to the upward direction and a maximum of 90o 3 to the downward direction. Forcefully rotating the LCD Monitor beyond these ranges will damage the Movie Camera. Closing the LCD Monitor Push the LCD Monitor until the [PUSH OPEN] Button is securely locked.
ª Adjusting Brightness and Colour Level
180N
! 90N
LCD/EVF SET LCD BRIGHTNESS [-]||||----[+] LCD COLOUR LEVEL [-]||||----[+] EVF BRIGHTNESS [-]||||----[+] PRESS MENU TO RETURN
When [LCD/EVF SET] on the [DISPLAY SETUP] Sub-Menu is set to [YES], the following items are displayed. (l 13) LCD Brightness [LCD BRIGHTNESS] It adjusts the brightness of the image on the LCD screen. LCD Colour Level [LCD COLOUR LEVEL] It adjusts the colour saturation of the image on the LCD screen. Brightness of the Viewfinder [EVF BRIGHTNESS] It adjusts the brightness of the image in the Viewfinder. To Adjust Press the [PUSH] Dial and select the item to be adjusted, and then turn the [PUSH] Dial to raise or lower the number of vertical bars in the Bar Indication. �A larger number of vertical bars indicates stronger brightness or colour saturation. Increasing the Brightness of the Entire LCD Monitor Set the [LCD MODE] on the [DISPLAY SETUP] Sub-Menu to [BRIGHT]. �These adjustments do not affect the recorded images. �For other notes concerning this item, see page 45.
