|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The TEAC A-1500's Service Manual was instrumental in reviving this classic reel-to-reel. Not only does it have the schematics, exploded parts diagram and parts list, it also provided mechanical adjustment information that approximate factory default settings.
 ;
This service manual was determinant to enable to fix my Alpine Amplifier. I am pleased with my purchase. For a 5 star rating I would like to see a higher resolution scan of the printed circuit board lay-out because the gray scale grafics was dificult to see. Also some schematic diagrams were scanned at a slight angle. Never the less, it had all information I needed to troubleshoot and service my equipment.
;
Complete manual, the good quality of reproduction allows enlarged print-out of the schematic diagram in the size it probably had in the original print edition and which is necessary for practical use.
;
The service manual was complete and the components on the drawings very good visible.
;
downloaded next day , manual is very helpful , fast and easy
PROCEDURES Press the FF and EJECT keys simultaneously for 3 seconds. Press the FF and EJECT keys simultaneously more twice. Press the EJECT key for 3 seconds.
FIP Display
Insert the Alignment Tape. (PAL: VFJ81215H3F) (NTSC: VFM8080HQFP) This adjustment is automatically started. (During the adjustment, the picture will be appeared on the monitor.) When this Adjustment is terminated, the following operation will be activated. -Adjustment completed: The tape will be ejected. -Adjustment incompleted: "F2*" is indicated on the FIP.Check the
Servo/System Control circuit and Cylinder Unit.
To release Service Mode, press the FF and EJECT keys. simultaneously 6 times until the normal indication on the FIP.
Fig. E1
4. ABBREVIATIONS
5. INPUT/OUTPUT CHART
5.1. INPUT/OUTPUT CHART FOR IC6001
Fig. MP1
22
|
|
|
> |
|
