PANASONIC NV-FJ630-2
Owner's Manual

To Immediately Record the Same Scenes of Programme That You Are Viewing on the TV (Direct TV Recording)
This function allows you to immediately start recording the same scenes of programme that you are viewing on the TV. Conditions for correct operation of the Direct TV Recording function: � Set [DIRECT REC] to [ON] (see page 12). � The VCR must be connected to the TV�s Audio/Video output socket via Audio/Video cable as shown. AV1 (VIDEO IN ` / AUDIO IN b)

To Select the Recording Duration and Perform Timer Recording (OTR Recording)
OTR means One-Touch Recording and is called this way, because you can start recording and select the recording duration by repeatedly pressing a single button. This is very convenient, for example when you want to start recording immediately but need to go out or want to go to bed. After the selected recording duration has elapsed, recording stops and the VCR automatically switches off. To Perform an OTR Recording: 1 Display the VCR picture on the TV. 2 Insert a video cassette with an intact erasure prevention tab. 3

VIDEO

IN

L AUDIO R OUT

Press the Channel button N to select the programme position on which the TV programme to be recorded will be broadcast. Press the REC/OTR button _ to start recording. Press the REC/OTR button _ repeatedly to select the desired recording duration. � Every time you press this button, the recording duration indicated in the VCR display changes in the following order. � For example, if you select [30], the VCR records a programme from that moment on for 30 minutes.

IN (AV1)

OUT

RF

4 5

Audio/Video Output Socket of TV

To Perform Direct TV Recording: 1 Insert a video cassette with an intact erasure prevention tab. Press the DIRECT REC button Q. � Recording of the TV programme that you are viewing on the TV starts. � In some cases, it may not be possible to change the programme position on the TV during Direct TV Recording. When viewing or displaying the programme from your TV: � Do not press the AV button 3,Numeric buttons 2 or Channel button N during Direct TV Recording, otherwise the recording may not be performed correctly. When viewing or displaying the programme from your VCR: � It is possible to select and view any other TV programme from your TV while the Direct TV Recording continues. After pressing the DIRECT REC button Q to start recording, select on your TV the programme position of the TV programme that you want to view. 3 Press the Stop button F to stop recording.

2

Counter display 30 60 (normal recording mode) (min.) (min.) 240 180 120 90 (min.) (min.) (min.) (min.)
To Stop the OTR Recording Before the End: Press the Stop button F.

Notes: � The OTR function works during normal recording and Direct TV Recording. � When the tape reaches its end during OTR recording, the VCR will turn itself off.

16