|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very good scan quality, only PC Board scan not enough contrast.
;
First of all I must say that I received the manual in just a few minutes after placing the order. The copy is well done and very readable. I will buy others soon... Thanks, Meyer
 ;
Good service manual. I gat all I want. Copy is good, but could be better. All clear and useful. I sincerely recommend.
;
The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.
;
Welcome. The scheme is clearly helped me to repair. Worth to download it.
Linearlty adjustment & BER value confirmation
1. Remove the mechanism adjustment cover of tis machine as shown in Fig. D1. 2. The spcial tool at the time of electricity adjustment is connected. Reference of the connection figure of electricity adjustment. 3. The enbelope detection spcial tool board (VFK1641) is connected to EVR adjustment board as shown in Fig. D2. 4. The enbelope detection spcial tool board is connected to oscilloscope as shown in Fig. D2. 5. The post is adjusted with the post driver(VFK1899) so that recycles the standard tape and the detection wave-link become a flat as shown in Fig. D3. *At the time of the clyinder unit exchange unnecessary. 6. The post is adjusted with the post driver so that recycles a alignment tape(VFM3010EDS) and the detection wave-link become a flat once again. 7. Recycling the tape that video-taped it wirh this machine after adjustment, the BER value is confirmed withthe item of the BER the item of the BER confirmation of expert soft inside.
Fig. D1
Fig. D2
45
|
|
|
> |
|
