This is a great manual. It was easy to read and very accurate. The size of the manual is small so email is no problem. I highly recommend it. The manual is very hard to find other than this website.
Whilst this is a photo copy, and some of the pages are a little askew, it was all readable and intact. A real bonus finding an old manual for a classic piece of kit that no other site had.
Great stuff.
It was easy done, and I got exactly what I was looking for.
Text excerpt from page 8 (click to view)
Settings
VCR Aerial TV RF-Coaxial cable
Connect all the cables as shown in the illustration, then connect the AC Mains lead (part of the package) to an AC wall outlet. To be able to receive TV programmes it is mandatory to connect the RF-Coaxial cable even if the video recorder is connected by a 21-pin Scart cable.
21-pin Scart cable
If you decide to just use the RF-Coaxial cable to connect the TV set you must adjust the video output channel with the TV set's input channel.
! ! !
! ! !
Switch on the video recorder Press the MENU button for approx. 7 seconds. The preset channel appears on the display. Tune the TV set until the test pattern appears. If there is any interference select another channel for the TV set and video recorder. Press the CH button to change the channel (e.g. to 38). CH Tune the TV set until the test pattern appears. Press ENTER to confirm.