Manual is in German but complete. I needed this one to fix a long lasting problem with the internal PSU of the camera. Most of the capacitors begin to leak after a few years wich results in the inability to power on the camera. When you try to turn it on the power led flickers and the unit directly turns off. Thanks to this manual I was able to locate all bad cap's and to dis- and reassemble the camera without any problems.
DISPLAY touch TEST 1 ADJUST 2 TEST
/////DIGITIZER////// TAP THE TIP OF THE PENCIL ICON
NOTE
Tap the tip of the pencil icon. When you do, the pencil icon you tapped disappears, and the next one appears. Tap 4 pencil icons.
Tap 4 pencil icons.
touch TEST 1 ADJUST 2 TEST Tap 4 pencil icons.
/////DIGITIZER////// TAP THE TIP OF THE PENCIL ICON
2 TEST
Trace the horizontal black line and then vertical black line.
ESC
[ OK ] ESC touch TEST 1 ADJUST 2 TEST TEST MENU 1 DISPLAY 2 MEMORY 3 TIME 4 BUZZER MAIN MENU
ESC
5 6 7 8
I/F CONTRAST TOUCH RESET
Reset
8 RESET
CONTRAST ADJUSTMENT
1 : Enter the diagnostic program and tap "6 : CONTRAST". 2 : Look the LCD from heading. 3 : Adjust the volume VR1 on the Z850-1 pcb ass'y. 4 : As to the step of hereafter, refer to "DIAGNOSTIC PROGRAM" mentioned above
