|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Great product, helped me to restore vintage walkman cassette.
Just some pictures could be little bit more sharp and contrast
Thank you
;
I love older radio's and the service manuals that are sometimes hard to find. Was able to find a manual quite easily on this site.
;
Thank you for your shop manual! Your help was very useful - the device is repaired! Once again - Thank you! I wish you a successful business! Edward (Russia).
;
It was a great experience,instead of purchasing a new Stereo Amplifier ,in just minutes i repaired my old one and that was thaks to the manual I have purchased from you.
Thanks again.
Samuel Alter
;
Das ging ja sehr unkompliziert hat bestens geklappt und die Quallität ist auch noch gut.
Vielen Dank dafür.
4044-001 Periodic irregularity down page
FRU PC Drum (Toner Cartridge) Distance Between Irregularity 96.2 mm Charge Roller (Toner Cartridge) Distance Between Irregularity 37.7 mm Supply Roller (Toner Cartridge) Distance Between Irregularity 31.3 mm Developer Roller (Toner Cartridge) Distance Between Irregularity 46.1 mm Transfer Roller Distance Between Irregularity 47.1 mm Hot Roll Distance Between Irregularity 56.4 mm Backup Roller Distance Between Irregularity 56.5 mm Action The PC drum or gear driving the PC drum may be contaminated or damaged. Inform the customer to replace the toner cartridge. The charge roller or gear driving the charge roller may be contaminated or damaged. Inform the customer to replace the toner cartridge. The supply roller or gear driving the supply roller may be contaminated or damaged. Inform the customer to replace the toner cartridge. The supply roller or gear driving the developer roller may be contaminated or damaged. Inform the customer to replace the toner cartridge. The transfer roller or gear driving the transfer roller may contaminated or damaged. Inspect the roller and gear. Replace as necessary. The hot roll of the fuser or gear driving the hot roll may be contaminated or damaged. Inspect the hot roll and gear. Replace or clean as necessary. The backup roller of the fuser may be contaminated or damaged. Inspect and replace as necessary.
Diagnostic Information 2-27
|
|
|
> |
|
