Having purchased a 1994 Kenwood music system from a Charity shop in 2013 (it was a high end product in its day), I found myself not quite knowing where to plug in what, and how to do this, that and the next thing. I needed a Manual, and after failure with another online 'Manual provider' I found Owner Manuals dot com. Well, I wasn't sure, but it was only $5, and if things didn't work out, I wouldn't have lost much...
But things DID work out. After paying my childrens inheritance money, $4.99, I was sent a Manual for my Kenwood System very quickly. Alas, it was in German, and being Scottish, I could not read it or get my system in order from it...a rapid email to them brought the English Manual in short order, and my retro-system was and IS up and running in it's regulation settings.
I am very grateful to http://www.owner-manuals.com for their quick service and for even having such an obsolete Manual in the first place! If you need a Manual for ANYTHING, try here first. I wouldn't be surprised if I bought a 1928 Marconi radio, and got the user Manual for THAT here too!
Top marks.
John Copeland
Glasgow
Scotland
I was so happy that the owner's manual was available. It is well written and helped me to use the radio/CD player/recorder without problems. Thanks for making it available.
Irene Lambert
Thanks so much for the Owner's manual for my Sony PS - FL1. I had purchased the turntable off of eBay. It came in and looked great. Packed well and appeared to be great. I balanced and aligned the tone are and hooked it up. When trying to play a record the tone are would move to the right place and just before it would drop to play it moved back off the edge of the record before touching down. I searched the net for an answer to this issue. No luck. Then I purchased the owners manual and sure enough there was a place to adjust where the stylus touched down. That adjustment solved the problem and saved me a $35 feet to have the player checked out. The manual is well written and easy to understand. It is a must have for anyone with this front loading Sony turntable.
Some years back I pruchased a Sansui G-9000. I had it cleaned up and a problem with the left channel repaired. When I got it back I hooked it up to my tape decks, turn tables, TV and it played great. The only thing I was not really satisfied with was the performance of my Graphic Equalizer. I purchased this owner's manual had poured myself a cup of coffee. The manual is well organized and written in plain language. It also contained the solution to my dissatisfaction. By using the preamp connections coupled I was able to run everything through my graphic equalizer and now enjoy the full potential of my complete system.
Text excerpt from page 5 (click to view)
GRIGLIE IN FERRO SMALTATO Nei piani di cottura dotati di griglie in ferro smaltato, queste possono essere sollevate e mantenute in posizione verticale, grazie agli appositi ganci di sostegno, come indicato nelle figure 5 e 6. Questa possibilità consente una rapida ed agevole pulizia del piano di cottura.
ATTENZIONE! Evitate assolutamente di compiere questa operazione nei piani dotati di griglie in ghisa, perchè questo causerebbe la rottura dei ganci. Per rimuovere le griglie in ghisa, seguite le indicazioni fornite nella pagine precedente (vedi anche Fig. 4).
FO 2237
Fig. 5
FO 2032
Fig. 6
3. MANUTENZIONE PERIODICA
Fate controllare periodicamente lo stato di conservazione e di efficacia del tubo del gas, e se presente, del regolatore di pressione. Qualora venissero riscontrate anomalie, non richiedete riparazioni, ma fate sostituire la parte difettosa. A garanzia del buon funzionamento e della sicurezza, è necessario procedere periodicamente all�ingrassaggio dei rubinetti di regolazione del gas. q La lubrificazione periodica dei rubinetti deve essere eseguita SOLAMENTE DA PERSONALE QUALIFICATO al quale ci si deve rivolgere anche nel caso si riscontrassero anomalie nel funzionamento dell�apparecchiatura.
