|
|
|
Who's Online
There currently are 5519 guests online. |
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
the manual was very helpful thank you very much no one else was able to help me thanx
;
This is an excellent handbook. We had no information on the appliance until we obtained this and are now able to use the appliance to its full potential. Strongly recommended.
;
Very happy to find this from owners-manual.com and the enclosed spec sheet as well.
Not longer available from Sony.
;
The Owner's manual was very helpful. The WEGA is about 35 years old and needed repair.
Your Website is pretty good und easily to handle.
Thank You
Carl-W. Lohmann
;
Perfect. Very good service and very good scanning quality. All sheets are very legible. Thank's
PROGRESS PC 3200, 3201, 3205
MAINTENANCE
REPLACING THE DUSTBAG
Always operate the cleaner with the dustbag installed. If you forget to attach the dustbag or attach it in the wrong manner, the dust cover may not close completely. After removing the flexible hose, open the front cover (fig. 21). Remove the support of the bag. Remove the dustbag and insert a new one (fig. 22). Close the cover by pressing down until it clicks (fig. 21). Dustbag reference number Menalux T183. Textile dustbag (PC3200, PC3201) Remove the textile bag from the holder (fig. 23). Slide the plastic clip away from the bag to open and empty it (fig. 23�24). Replace the plastic clip ensuring that both sides of the bag are parallel (fig. 23). Replace the bag into the holder (fig. 23). Note: The bag may be washed in luke warm water and dried completely. It should not be washed in washing machine (fig. 26). Close the cover by pressing down until it clicks (fig. 21).
REPLACING THE FILTERS
The dustbag must be replaced if the window of the dustbag full indicator is completely red when the cleaner is operating at maximum power and the nozzle is raised from the floor. Filters should be replaced at least twice a year or when they become visibly soiled. Always operate the cleaner with filters installed to avoid reduced suction. Disconnect from electrical outlet before changing the filters. Do not use a washing machine to rinse filters. Pull dustbag upward and remove the motor protection filter (fig. 27). Rinse the filter under tap water and dry it completely (fig. 28). Place the filter back into the cleaner (fig. 27). Open the filter cover to remove the exhaust filter with grill (fig. 29, 30). Take the filter out of the grill (fig. 31). Rinse the filter under tap water and dry it completely (fig. 28). Place the filter back into the grill and put it back into the cleaner (fig. 30, 31). Close the filter cover (fig. 29).
PROTECTING THE ENVIRONMENT
Attempt to recycle packaging material and old appliances. The cardboard packaging can be placed in the waste paper collection. Deposit the plastic bag made of polyethylene (PE) at the PE collection point for recycling. Recycling the Appliance at the end of its life: The plastic components all carry a material identification marking so that, like the other materials, they can be recycled at the end of the life of the appliance. Please inquire with your local authority. Blocked air flow and dirty filters: The cleaner stops automatically if a blockage occurs in the nozzle/tube/hose or if the filters are blocked with dirt. Disconnect from mains and allow the cleaner to cool for 20�30 minutes. Remove blockage and/or clean filters. Restart the cleaner.
- 24 -
-5-
|
|
|
> |
|
