|
Categories
|
Information
|
Featured Product
|
|
|
 |
|
There are currently no product reviews.
 ;
Very clear scan, I recommend it. Definitely a must have for any 3362 owner.
Alpine could have written a slightly more complete manual, though. It's already pretty huge, but the unit has so many functions, I feel some more explanation would have been better.
Yamaha's manual of their comparable YDSP-1 is a little better in my opinion.
 ;
Immediate response with excellent service - highly reccommended
 ;
Correct manual received and of good quality but the contents of the file for the Service Manual for the same monitor is for a 20" TV not the RGB Monitor.
 ;
The owners manual for the Pioneer VSX-D603S was exactly what I needed. I received it in a timely manor and it was priced fairly. I definately will use your servise again. Thank You
 ;
This is a great manual. It was easy to read and very accurate. The size of the manual is small so email is no problem. I highly recommend it. The manual is very hard to find other than this website.
MAINTENANCE
REPLACING THE DUSTBAG
� Always operate the cleaner with the dustbag installed. � If you forget to attach the dustbag or attach it in the wrong manner, the dust cover may not close completely. � After removing the flexible hose, open the front cover using the compartment open button (fig. 21). � Rotate the support of the bag to the vertical position. � Remove the dustbag and insert a new one (fig. 22). � Close the cover by pressing down until it clicks (fig. 21). � The paper dustbag reference number is Menalux T120 or it can be used with SMS (textile) dustbag. Textile dustbag � Remove the textile bag from the holder (fig. 22). � Slide the plastic clip away from the bag to open and empty (fig. 23, 24). � Replace the plastic clip ensuring that both sides of the bag are parallel (fig. 23). � Replace the bag into the holder (fig. 22). Note: The bag may be washed in luke warm water and dried completely. It should not be washed in washing machine (fig. 25). � Close the cover by pressing down until it clicks (fig. 21).
BLOCKED AIRFLOW AND DIRTY FILTERS
� The cleaner stops automatically if a blockage occurs in the nozzle/tube/hose or if the filters are blocked with dirt. � Disconnect from mains and allow the cleaner to cool for 45�60 minutes. Remove blockage and/or replace filters. � Restart the cleaner.
CLEANING / REPLACING THE FILTERS
� The dustbag must be replaced if the window of the dustbag full indicator is illuminated. � Filters should be replaced at least twice a year or when they become visibly soiled. � Always operate the cleaners with filters installed to avoid reduced suction. � Disconnect from electrical outlet before cleaning filters. Cleaning the motor filter � Pull dustbag upward and remove the motor protection filter (fig. 26). � Rinse the filter under tap water and dry it completely (fig.29). � Put the filter back into the cleaner and close the cover (fig. 26, fig. 21). Cleaning the exhaust filter � Open the filter grill and remove the exhaust filter (fig. 27, fig. 28). � Rinse the filter under tap water and dry it completely (fig. 29). � Put the filter back into the cleaner and close the filter grill (fig. 28, fig. 27).
PROTECTING THE ENVIRONMENT
� Attempt to recycle packaging material and old appliances. � The cardboard packaging can be placed in the waste paper collection. � Deposit the plastic bag made of polyethylene (PE) at the PE collection point for recycling. Recycling the appliance at the end of its life: � The plastic components all carry a material identification marking so that, like the other materials, they can by recycled at the end of the life of the appliance. � Please inquire with your local authority.
- 18 -
-3-
|
|
 |
> |
|