|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Hello from Germany - thank you very much for the manual for my Sharp "Searcher" - the handling of your internet area is outstanding..Mike
;
I am very happy with the owner's manual. I bought a used Casio and was so relieved that I was able to get a hold of a owner's manual. It was very easy to download the manual and I had no problems with printing it. Thank you! Nancy Whalen
;
The purchased manual is an high-quality scan of the original JVC paper-based Owner´s Manual. I am very satisfied!
;
Very satisfied with received document, all is right, Thank You very much, it was a Pleasure to work with You.
 ;
great site, the most easy and fastest way to find the manual you need, no 5 star because the manual was only available in german, but I speak german as well so no problem for me.
MAINTENANCE
REPLACING THE DUSTBAG
� Always operate the cleaner with the dustbag installed. � If you forget to attach the dustbag or attach it in the wrong manner, the dust cover may not close completely. � After removing the flexible hose, open the front cover using the compartment open button (fig. 21). � Rotate the support of the bag to the vertical position. � Remove the dustbag and insert a new one (fig. 22). � Close the cover by pressing down until it clicks (fig. 21). � The paper dustbag reference number is Menalux T120 or it can be used with SMS (textile) dustbag. Textile dustbag � Remove the textile bag from the holder (fig. 22). � Slide the plastic clip away from the bag to open and empty (fig. 23, 24). � Replace the plastic clip ensuring that both sides of the bag are parallel (fig. 23). � Replace the bag into the holder (fig. 22). Note: The bag may be washed in luke warm water and dried completely. It should not be washed in washing machine (fig. 25). � Close the cover by pressing down until it clicks (fig. 21).
BLOCKED AIRFLOW AND DIRTY FILTERS
� The cleaner stops automatically if a blockage occurs in the nozzle/tube/hose or if the filters are blocked with dirt. � Disconnect from mains and allow the cleaner to cool for 45�60 minutes. Remove blockage and/or replace filters. � Restart the cleaner.
CLEANING / REPLACING THE FILTERS
� The dustbag must be replaced if the window of the dustbag full indicator is illuminated. � Filters should be replaced at least twice a year or when they become visibly soiled. � Always operate the cleaners with filters installed to avoid reduced suction. � Disconnect from electrical outlet before cleaning filters. Cleaning the motor filter � Pull dustbag upward and remove the motor protection filter (fig. 26). � Rinse the filter under tap water and dry it completely (fig.29). � Put the filter back into the cleaner and close the cover (fig. 26, fig. 21). Cleaning the exhaust filter � Open the filter grill and remove the exhaust filter (fig. 27, fig. 28). � Rinse the filter under tap water and dry it completely (fig. 29). � Put the filter back into the cleaner and close the filter grill (fig. 28, fig. 27).
PROTECTING THE ENVIRONMENT
� Attempt to recycle packaging material and old appliances. � The cardboard packaging can be placed in the waste paper collection. � Deposit the plastic bag made of polyethylene (PE) at the PE collection point for recycling. Recycling the appliance at the end of its life: � The plastic components all carry a material identification marking so that, like the other materials, they can by recycled at the end of the life of the appliance. � Please inquire with your local authority.
- 18 -
-3-
|
|
|
> |
|
