There are currently no product reviews.
;
Very complete shop manual. It contains everything needed to troubleshoot bascially any problem. Instructions, diagrams, schmeatics, illustrations... it's all there. Highly recommended!
;
Great product, very good quality, found all needed information. Thanks
;
Excellent quality, helped to fix problem. Thank you very much!!!!
;
I thank Owner-Manuals.com for providing the necessary manual very quickly, and it was very helpful in repairing my personal Audio System and I once again thank them for the wonderful customer's service satisfaction.
Thanks.
;
Everything fine: quick service, no glitch and above all a very good quality of the Pdf file. Thank you!
CHAPTER 11 TROUBLESHOOTING
Adjusting the Mirror Position (optical length between No. 1 mirror and No. 2 mirror) If you have replaced the scanner drive cable, you must adjust the mirror position, by changing the position of the cable retainer of the No. 1 mirror mount. Reference: 1. As more and more copies are made, the cable tends to become slack, requiring adjustment. 2. If the optical length between the No. 1 mirror and the No. 2 mirror is not correct, the horizontal reproduction ratio will be wrong, causing poor sharpness or blurred images.
c.
1) Fit the mirror positioning tool (FY9-3009) as shown.
Figure 11-205 2) Remove the copyboard glass. (See Chapter 7.III.C.1. �Removing the Copyboard Glass�.) 3) Loosen the screws used to secure the cable retainer at the rear and the front of the No. 1 mirror mount [1].
[1]
Figure 11-206
COPYRIGHT © 1999 CANON INC.
CANON PC800s/900s REV.0 AUG.1999 PRINTED IN JAPAN (IMPRIME AU JAPON)
11-7
$4.99 PC890 CANON Parts Catalog Parts Catalog only. It's available in PDF format. Useful, if Your equipment is broken and You need t…
|