I am only search for 5 Minute, by it in 5 Minutes to and get ist in few ours! Best i found in the Internet and my Amplifer is repaired as well! Thank you
I found the manual to be clear concise and complete. It was of immense assistance when removing the unit as the unit was over 22 years old and the wiring diagram was unobtainable from the manufacturer. The exploded drawings were clear as were the instructions and labels.
I will highly recommend this seller. They are honest, accurate, fast and responsible.
Text excerpt from page 12 (click to view)
Remove the glide pad cable.
Use a clearance gauge or the like to remove hinge caps.
Remove the two cables that connect the display unit to the board. Remove the four screws (2 at each side) securing the display unit . Remove the display unit.
14
Raise the tip of the connector to unlock.
13
13
Remove the glide pad button (2 screws) Remove the screw securing the HDD. Remove the HDD.
12
12
17 18
19
Remove the glide pad that is secured to the button section with double-coated tape.
15
17
Remove the three screws securing the cooling body.
17
Remove both the cooling body and mother board from the lower cabinet. Remove both the fan and cooling body from the mother board.