|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
notebook Connecting the camera to a desktop computer
1
cable to the USB connector on your notebook. Attach camera to the mounting adapter. � Holding plate, pull out rear arm as shown in the illustration Holding plate, pull out rear arm as shown in the illustration below, and attach camera to the mounting adapter. Make sure you below, and hang camera on top of the display panel. place the mounting adapter on an level, stable surface.
Arm
Mount camera onto your notebook, and connect the camera�s USB
� When using an NV Series VAIO computer, use the mounting adapter.
Arm plate Arm
Arm plate
Mounting adapter
Arm plate
Arm
1-2. Connecting the Camera
z Hint
You can also attach camera using the supplied adhesive sheet.
Mounting adapter With some models, you can use adhesive sheet as shown in the illustration to
1�2
attach camera to top of the LCD monitor. 1 Peel separation sheet from the side covered with double-sided tape. 2 Stick adhesive sheet to bottom of the camera. 3 Peel protective film from back of the adhesive sheet. to attach the camera. notebook is turned on. For details on the location of your notebook�s USB
The camera can be disconnected or connected while power your 4 Stick adhesive sheet to the location where you want
connector, refer to the manuals provided with your notebook.
2 Connect camera s cable to the USB connector on
your desktop computer. The camera can be disconnected or connected while the power to your desktop computer is turned on. For details on the location of your desktop computer�s USB connector, refer to the manuals provided with your desktop computer.
Continued on next page
Reproduced from User Guide [4-668-843-01(1) and 4-668-843-11(1)]
Confidential
PCGA-UVC10 (J/AM)
12 GB
13
|
|
|
> |
|
