|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
I found this manual to be complete in every detail. Besides the schematic it has a complete set of alignment instructions which are easy to understand. It also includes a complete parts list as well as an explanation of how the power supply and safety shutdown circuits operate. Even a schematic of the tuner is included.
 ;
The product was good and just what I needed, however I had moderate difficulty with the down load because the sight would not recognize my pass word. I was finally given a direct link to the manual and that worked.
;
Very quick and easy website to use and fast download of manual, quality of manual is excellent and will be pleased to use this service again in the future, thanks so much!
;
It is an very good and clear scanned service manual.
very recommended.
;
Easy to order the manual. Good quality and fast delivery.
15. Serial loopback test Tests the COM port. The serial loopback jig is necessary. Connect the serial loopback jig to the COM port. 16. USB test Tests the USB port. To perform this test, the USB jig is necessary. Connect the USB jig to the USB port. 17. Port Replicator connector test To perform this test, the port replicator and USB tester are necessary. 18. IrDA test Tests the IrDA communication. To perform this test, the PCG-505G series computer is necessary for communication. 19. Video test Tests the circuit blocks related to the video display. Tests the various video modes. A part of display is not shown as the video signal is displayed partly outside the screen in some tests of LCD (i.e., 1024 x 768 mode) when using the SVGA (800 x 600) displays. But this is normal. 20. IEEE1394 test Executes the data transfer test of the IEEE1394. 21. PPK test Tests the PPK. 22. Aging (Short time) HDD test Executes the memory and main system tests repeatedly including the HDD test. It takes about four hours. Contents of HDD are destroyed when this test is performed. 23. Aging (Long time) HDD test Executes the memory and main system tests repeatedly including the HDD test. It takes about ten hours. Contents of HDD are destroyed when this test is performed. 24. Aging (Short time) Executes the memory and main system tests repeatedly. It takes about fifteen minutes. 25. Aging (Long time) Executes the memory and main system tests repeatedly. It takes about ten hours.
2-7
PCG-F250/F270/F280 (UC)
 $4.99 PCG-F280 SONY
User Guide It's a complete guide ( also known as operating manual or owner's manual), and it's in PDF format. A…
|
|
|
> |
|
