|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
IF PRINTED CIRQUIT BOARD WIRING VIEW WAS ONE TONE LIGHTER, THEN 5 STAR RANK HAS TO BE MY CHOISE.
 ;
Very usefull, good quality drawings !
Muito útil encontrei todas as informações necessárias.
;
Wanting to repair a neighbours tape recorder I needed the necessary information, it makes it easier. Although the service manual is described as "Language : English" To my dismay I found that it is entirely written in German, a language I do not understand. At least I now have the schematics which will help of sorts. I may not use this service again due to the laguage difficulty after all when it states English you do not expect it to be entirely in another language.
;
GOOD SERVICE MANUAL.I ALWAYS BUY THERE IF I FIND WHAT I AM LOKING
;
Good quality (clearly readable) manual, I'm glad I could find it here, at a bargain price!
1-4.Replacing the CPU
1. Removing the CPU
1
2
3
2
1 Insert a screwdriver tip into the groove as shown and slant it in the direction of the arrow. NOTE: Do not use screwdrivers having a large tip than the width of the groove. Otherwise, it may cause the groove to be damaged. 2 The base under the CPU moves slightly in the direction of the arrow and the lock is released. 3 The CPU can be removed upward.
2. Installing the CPU
Attach the CPU while aligning the cut-out with this position.
2
1 3
3
1 Insert all pins of the replacement CPU into the holes of the base and push the CPU in the direction of the arrow. 2 Insert a screwdriver tip into the groove as shown and slant it in the direction of the arrow. 3 The base under the CPU moves slightly in the direction of the arrow and the CPU is locked.
NOTE: The DIP switch on the MBX-39 board (main board) is set to match with the CPU (8-759-697-16) that is used in this computer. (The upper position where ON indication is shown is the ON position . The lower position is the OFF position.)
ON
12345678
Confidential
PCG-F610/F630 (UC) 1-10
|
|
|
> |
|
