|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
The product was good and just what I needed, however I had moderate difficulty with the down load because the sight would not recognize my pass word. I was finally given a direct link to the manual and that worked.
 ;
Very quick and easy website to use and fast download of manual, quality of manual is excellent and will be pleased to use this service again in the future, thanks so much!
;
It is an very good and clear scanned service manual.
very recommended.
;
Easy to order the manual. Good quality and fast delivery.
;
The Service Manual for Sansui AU-9500 was very helpfull, in complete and in good printable condition.
Thanks.
1-4.Replacing the CPU
NOTE: This computer uses either one of the two types of CPU socket. The CPU locking position and the lock-release position are different depending on the types of the CPU socket.
1. Socket type 1, 2
1. Removing the CPU
1
1 Insert a flat-blade screwdriver into the notch as shown in the illustration and rotate it so that the protrusion comes to the lock release position. 2 Pull the CPU gently upward to lift it out of the CPU socket.
CPU 2
CPU socket
Lock release position (made by HIROSE)
Lock release position
2. Installing the CPU
2
1 Align the triangle reference mark of the CPU with that of the CPU socket and insert all the pins of the CPU to the corresponding holes of the CPU socket. 2 Insert a flat-blade screwdriver into the
CPU
1
notch as shown in the illustration and rotate it so that the protrusion comes to the lock position. Reference marks
CPU socket
Lock position (made by HIROSE)
Lock position
NOTE: Rotate a flat-blade screwdriver to the lock position securely. If not, the operation of the CPU may become unstable.
Confidential
1-13
PCG-FX310/FX310K/FX310P/FX340/FX340K/ PCG-FX340P/FX370/FX370K/FX370P/FX390/ PCG-FX390K/FX390P (AM)
|
|
|
> |
|
