|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Absolutely perfect! I've been trying to understand how to use all or at least some of the features of the receiver and especially the remote.
;
Copy of genuine owners/operators manual, very useful
;
The manual was a perfect match and was exactly what I was looking for. I'm very satisfied with my purchase.
;
Thank you for having the manual I needed for an older model Aiwa stero I had found on Ebay --- I wanted the Aiwa because I had tapes and cd's but I did not have a manual as to how to operate the system... I found what I needed and it has enabled me to set the system up for my enjoyment.
;
I wished detailed information of the JBL S310 and here I found it! Very happy with the service from this site!
64
VAIO® Z505 SuperSlim Pro Notebook User Guide
When I turn on my computer, the message �Operating system not found� appears and Windows does not start u Check the floppy disk drive to see if a non-bootable diskette is in the
drive.
u
If a non-bootable diskette is in the drive, turn off the computer, remove the diskette, and then turn on the computer again. Confirm that Windows starts properly. If Windows still does not start, follow the procedure below to initialize the BIOS. If the floppy disk drive is empty or contains a bootable diskette, use the following procedure to initialize the BIOS:
u
1 Remove the floppy disk drive, port replicator, PC card, and any other
peripheral devices from the computer.
2 Turn the computer off and then turn it on again. 3 Turn on the computer and press the F2 key when the Sony logo appears.
The BIOS setup menu screen appears.
4 Press the arrow keys to select the Exit menu. 5 Press the arrow keys to select Get Default Values and then press the Enter
key. The message �Load default configuration now?� appears.
6 Check that Yes is selected, then press the Enter key. 7 Press the arrow keys to select Exit (Save Changes) and then press the Enter
key. The message �Save configuration changes and exit now?� appears.
8 Check that Yes is selected, then press the Enter key. The computer restarts.
When I turn on my computer, the message �C:\WINDOWS� appears and Windows does not start u Enter �win,� then press the Enter key. When the message �MS-DOS is
activated. Do you want to return to Windows and restart applications?� appears, press the Enter key again. Windows starts.
u
When shutting down your computer, follow the procedure in �Shutting Down Your Computer� on page 13. Windows should start automatically the next time you turn on your computer.
|
|
|
> |
|
