|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very good scan quality, only PC Board scan not enough contrast.
;
First of all I must say that I received the manual in just a few minutes after placing the order. The copy is well done and very readable. I will buy others soon... Thanks, Meyer
 ;
Good service manual. I gat all I want. Copy is good, but could be better. All clear and useful. I sincerely recommend.
;
The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.The schematic is very helpful and the images are very good.
;
Welcome. The scheme is clearly helped me to repair. Worth to download it.
2. Insert the PC card in a personal computer. When the PC card is a good one, the �Signal strength� graph on the �Sony Wireless LAN Client Manager� screen changes from gray to green.
< Removing the PC card > 9. Double-click the �Unplug or Eject Hardware� icon.
Signal strength graph
Remarks: If the color does not change: � The main power of the access point is not turned on. � The PC card is defective.
Unplug or Eject Hardware icon
< Executing the card diagnosis > 3. Select �Advanced� � �Card diagnosis� on the �Sony Wireless LAN Client Manager� screen. 4. The diagnosis screen will appear. Click �Test card now�. Check that �OK� appears on all items.
10. The �Unplug or Eject Hardware� screen will appear. Select �Sony PCWA-C150Wireless PC Card� and click the �Stop� button.
Click
[Card Diagnosis screen]
5. Press the �Cancel� button to end the card diagnosis. 11. The �Safe to Remove Hardware� screen will appear. Select �Sony PCWA-C150Wireless PC Card� and click OK. The following message appears.
< Executing the LINK Test > 6. Select �Advanced� � �LINK Test� on the �Sony Wireless LAN Client Manager� screen. 7. The LINK Test screen will appear. Check �SNR� and �Signal level� in the �This station� and the �Test Partner�.
Select �OK� and remove the PC card.
End of inspection When you want to inspect other cards continuously, repeat steps 1 to 11 of section 1-3.
1-4. Procedure How To Identify the Error When the PC Card Is Defective.
Preparation: � Prepare the dummy antenna block. 1. Separate the card and antenna block. 2. Install the dummy antenna block to the card. 3. Perform inspection of steps 1 to 11 of item 1-3. 4. If the product works satisfactorily, the antenna block is diagnosed to be a good antenna block. 5. If the product does not work satisfactorily, the card block is defective.
[LINK Test screen]
Inspection criterion � The �SNR� gauge should light in green. If the �SNR� gauge lights in yellow, the equipment is diagnosed as defective. � The �Signal level� should be -55 dBm or more. 8. Press the �Cancel� button to end the inspection.
�5�
Confidential
|
|
|
> |
|
