PIONEER PD-F1007/KU
Service Manual

PD-F1007

Removal of the Gear Holder Assy and the Disc Rack
1 Perform the steps 1 to 6 of " Removal of the Servo Mechanism Assy GM ". 2 Remove the screws A (2 screws), and then remove the Gear Holder Assy. 3 Remove the Disc Rack.

2

Screw A (� 2) Gear Holder Assy

3

Disc Rack

Removal of the Hood and Hood Base Assy
1 Perform the steps 1 to 6 of " Removal of the Servo Mechanism Assy GM ". and the steps 2 and 3 of " Removal of the Gear Holder Assy and the Disc Rack". 2 Remove the screws B (3 screws), and then remove the Front Panel Assy. 3 Slide the Hood to the left side and remove it. 4 Remove the screws C (2 screws) and remove the Hood Base Assy.

Disconnect the Hook

3 2
Screw B Front Panel Assy Hood Hood Base Assy Disconnect the Hooks Screw B Disconnect the Hook Screw B

4

Screw C (� 2)

2

2

Hood Base Assy

50