|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
muy buen manual por lo completo de este algunos esquemas estan muy divididos lo que hace algo dificil el seguimiento.
;
very good manual, with detail and clarity in esquematic diagrams and waveforms .
 ;
Very quality copy of original service manual, which contains the circuit diagrams, PCB and lists of components, well as recommendation for calibration procedures of device, also everything else, that need for repair, tuning and use this oscilloscope.
All presented copies have high-resolution, so you can view all in detail.
This manual will very useful for simple owners and for repairers.
I recommend these manual, because myself is owner of Philips PM3216 and I need sometimes servicing these oscilloscope (principally calibrating).
Also, these document is an example of excellent design of technical documentation.
;
Excellent printing quality.
A complete and very usefull service manual with all details.
GREAT SERVICE AT VERY LOW PRICE!
A+++++++++++++++++++++++++
;
manual excelente completo , diagramas y esquemas bien presentados y buena calidad de imagen.
PD-F1007
Removal of the Gear Holder Assy and the Disc Rack
1 Perform the steps 1 to 6 of " Removal of the Servo Mechanism Assy GM ". 2 Remove the screws A (2 screws), and then remove the Gear Holder Assy. 3 Remove the Disc Rack.
2
Screw A (� 2) Gear Holder Assy
3
Disc Rack
Removal of the Hood and Hood Base Assy
1 Perform the steps 1 to 6 of " Removal of the Servo Mechanism Assy GM ". and the steps 2 and 3 of " Removal of the Gear Holder Assy and the Disc Rack". 2 Remove the screws B (3 screws), and then remove the Front Panel Assy. 3 Slide the Hood to the left side and remove it. 4 Remove the screws C (2 screws) and remove the Hood Base Assy.
Disconnect the Hook
3 2
Screw B Front Panel Assy Hood Hood Base Assy Disconnect the Hooks Screw B Disconnect the Hook Screw B
4
Screw C (� 2)
2
2
Hood Base Assy
50
|
|
|
> |
|
