|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
 ;
I didn't realise a manual for an early plasma TV such as the one we were gifted could be so easily obtained. No manual was supplied with it, and as senior citizens we were a little puzzled over some aspects of its use. I do not want a listing for your store credit as we are not fairly big computer users. The manual was well organised, as it should be, with its backing of the Pioneer name. The download was prompt and everything worked quite smoothly. Thank you. Gordon.
;
Hi - happy with what I received but not quite what I wanted - my fault I assumed that service manual would also include operational instructions which is what I needed - all I needed to know was how to turn the radio - thanks
;
this Manual very important when i buy this Manual i already fix the trouble of my Camera..... thanks keep up the good work.!
 ;
This service manual helped me to repair my PIONEER. Iam very satisfied, that I found it here.
Even the price of manual was not so high that person would not be able to spend a few money.
But that is very worth spent money. Thanks
;
Excellent quality service manual. Quick processing, fair prices. Love to do business again. Thank you!!!
;
Excellent service manual, the only known point of note is the alignment of improvability scanned pages within the pdf page. The resolution is good.
1
2
3
4
Flowchart of Failure Analysis for The Video-system Assy
A
DTV doesn't work
DTV
Digital broadcasting is not received. YES
< PDP-427XDA : Only >
Is any function which inputs signal selected with the input selector? YES Has the symptom settled when the Digital RF IN terminal and input cable are checked ? NO
NO
Select a designated input with the input selector.
YES
Poor contact of the terminal part or input cable is defective.
Is the power-supply voltage of CN4017 normal? YES
NO
Check between CN4017 and P3,P8 (Power Supply).
B
Is RESET_DT(IC8401 159pin) High? YES Do you communicate by TXD_DT(IC8401:103) and RXD DT(IC8401:102)? YES Is a signal output from CN4013? YES Is the signal input from CN4013 to IC8001? YES Has the symptom settled when the DTB Assy is replaced? NO Has the symptom been settled when the MAIN Ass'y is replaced? YES YES The DTB Assy is defective. Replace the DTB Assy. NO Check between CN4013 and IC8001. NO Check between IC8401(102,103) and CN4014. NG Replace Main Ass'y NO Check between IC8401(159pin) and CN4014.
NG
Replace DTV Ass'y
C
NO
The panel is defective.
Finishing troubleshooting
D
E
F
PDP-427XG
1 2 3 4
21
|
|
|
> |
|
