|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Some of the pictures in this manual are a bit irritating. I had to dissassemble the unit and some of the screws have different threads, which is not mentioned in this manual. Also some of the drawings of the boards look different than the actual boards.
After all, the manual was very useful. I was able to recalibrate the capstan drive and it is working fine again.
 ;
This manual is very good. 303 pages scanned in a very high resolution. My camera has bad, leaking capacitors which all of the V5000 models are suffering from these days.
There is a huge part list with all capacitors, transistors etc. in this manual which helped me a lot. Otherwise I would not have been able to buy replacement parts.
The dissassembly guide is very enormous and detailed. Unlike on the Panasonic MS1 manual I downloaded here it actually looks like the real parts look. And the screws are labeled correctly, so you shouldn't have any left after the repair. ;)
;
has all the schematics you could need,and very well laid out format also has all part numbers along with an exploded view which is helpful
;
Very nice to have! Now it is no problem to understand how it is put together.
Helps me a lot.
;
good scans, all is clear. all pages in order. recommended
1
2
3
4
A
SUS-B ADJUSTMENT
X DRIVE Assy
TP1118 from DIGITAL Assy XSUS-U IC1104 IC1002_A1 Pin 2 IC1101 Photo Coupler Q1109 IGBT TP1119 Q1104 Q1108 IGBT
B
1 Measure the SUS-U and SUS-B input delay time (� Tsus - iub).
2 Adjust the SUS-U and SUS-B input delay time so that it becomes "� Tsus - iub + 70 ± 5 nsec."
TP1236 Q1205
from DIGITAL Assy XSUS-B IC1001_A1 Pin 2
VR1002 IC1204 Photo Coupler
IC1209 Q1206
TP1237
Q1219 FET
TP1238 Q1207
Q1220 FET
C
Q1222 FET
Y DRIVE Assy
TP2105 Q2106 IGBT Q2104 TP2106 Q2107 IGBT TP2107 Q2108 IGBT
from DIGITAL Assy YSUS-U
IC2103 IC2001_A4 Pin 5 IC2101 Photo Coupler
D
1 Measure the SUS-U and SUS-B input delay time (� Tsus - iub).
2 Adjust the SUS-U and SUS-B input delay time so that it becomes "� Tsus - iub + 50 ± 5 nsec."
TP2207 Q2204
from DIGITAL Assy YSUS-B IC2001_A6 Pin 7
VR2002 IC2201 Photo Coupler
IC2203 Q2205
TP2208
Q2217 FET
TP2209 Q2206
Q2218 FET
Q2219 FET
E
SUS-D ADJUSTMENT
Y DRIVE Assy
1 Measure the SUS-D pulse width (Tsus - D).
TP2109 from DIGITAL Assy VR2001 IC2005_A7 Pin 8 IC2104 Q2105 Q2110 IGBT
2 Adjust the pulse width (Tsus - Dg) of the SUS-D input signal so that it becomes "Tsus-D ± 5 nsec."
F
YSUS-D
Q2112 IGBT TP2111
140
1 2
PDP-4280XA
3 4
|
|
|
> |
|
