|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Very quality copy of original service manual, which contains the circuit diagrams, PCB and lists of components, well as recommendation for calibration procedures of device, also everything else, that need for repair, tuning and use this oscilloscope.
All presented copies have high-resolution, so you can view all in detail.
This manual will very useful for simple owners and for repairers.
I recommend these manual, because myself is owner of Philips PM3216 and I need sometimes servicing these oscilloscope (principally calibrating).
Also, these document is an example of excellent design of technical documentation.
;
Excellent printing quality.
A complete and very usefull service manual with all details.
GREAT SERVICE AT VERY LOW PRICE!
A+++++++++++++++++++++++++
 ;
manual excelente completo , diagramas y esquemas bien presentados y buena calidad de imagen.
;
muy buen manual completo de buena calidad de impresion preciso y detallado , muy útil para la reparación.
;
The service manual is a good quality scan of the Panasonic NV-850, which is electrically identical to the Philips VR 6920, but mecanically just nearly.
1
2
3
4
Audio
A
No sound from the speakers Yes Are the SP cables properly connected? Yes Is sound muting set? Yes Is the volume set to 0? No Raise the volume then check again. No Connect the SP cables properly then check again.
No
Cancel muting then check again.
B
Yes AUDIO AMP Assy 2 3 Is a signal output from IC5003 Yes on the AUDIO AMP Assy? No AUDIO AMP Assy 1 Has the signal arrived at IC5003 on the AUDIO AMP Assy? No Yes Check around IC5003. Check the connection between the AUDIO AMP Assy and the SP Terminal Assy.
A
AV I/O Assy =
C
Is a signal output from IC7603 Yes on the AV I/O Assy? No Has the signal arrived at IC7603 on the AV I/O Assy? No Yes
Check around IC7605, IC7606, and IC7607 on the AV I/O Assy, and the connection between the AV I/O Assy and AUDIO AMP Assy. Is communication between IC7603 and the microcomputer OK? Yes Check around the IC7603. No
Check the communication line.
AV I/O Assy Is a signal output from IC7601 No on the AV I/O Assy? Yes Is IC7601 on the AV I/O Assy properly controlled by the microcomputer? Yes No Check the communication between IC7601 and IC7603.
D
Check the control line from the microcomputer.
Check the communication between each input terminal and IC7601.
E
F
138
1 2
PDP-5004
3 4
|
|
|
> |
|
