|
|
|
Categories
|
|
Information
|
|
Featured Product
|
|
|
 |
|
|
There are currently no product reviews.
 ;
Came in the mail within a few hours. Gave clear instruktion on maintaines. Is of great use to have this manual in house
 ;
Easy to access. Clear instructions. No problems. Printed fine.
;
Great scan but please note that it is entirely in GERMAN.
;
High quality scan of the manual, very quick and easy download and very important, a truly honest price. thanks
;
Minden rendben, de két megjegyzés, az ábrák nehezen kivehetők és a fizetés után 24 órát kell várni a letöltésre.
Preparation
Installing the Plasma Display
Locating
Over 50 cm (19 11/16 inch)
� Avoid the direct sunlight. Keep enough ventilation. � The length of the system cable used to connect the Plasma Display and the Media Receiver is about 3 m (118 inch). � Because the Plasma Display is heavy, be sure to move it by more than two persons.
L � If you place anything on top of the Media Receiver it will not receive enough ventilation and not operate properly. A � Keep enough space around the upper and back parts when installing in order to ensure ventilation around the backside.
Over 10 cm (3 15/16 inch )
Using the optional PIONEER stand
� For details on installation refer to the instruction manual provided with the stand.
L � This product may be used only with model PDK-TS01 stand, use with other stands may result in instability causing possible injury.
Using the optional PIONEER speakers
� For details on installation refer to the instruction manual provided with the speaker.
L Operating Environment Operating environment temperature and humidity: e0°C to e40°C (e32F to e104F); less than 20 % to 80% RH (cooling vents not blocked) Avoid installing in the following locations: � Under direct exposure to sunlight, � Under strong artificial light, � In high humidity, � Poorly ventilated.
E-5
|
|
|
> |
|
