|
There are currently no product reviews.
 ;
Good quality service manual.The scheme is on A3 format and very readable.Thank you
;
Very good service-manual with clear electrical diagrams. Thanks you.
 ;
the manual is in quite good quality and it's in pdf. manual was send in less then 6h.
;
Absolutely top, I've got now all Service-Manuals I'll need to repair my Mackie-Mixer!
;
The service manuel is very helpful, we where able to restore the device to its working operation again.
PDP-503PE, PDP-503PU
Y DRIVE, SCAN (A), (B) Assy
1
Remove the three screws.
7 8 9
Remove the Rear Case (50P). (Screws � 19) Remove the Y DRIVE Assy. (Connector, Screws � 8) Remove the Front Chassis V. (Screws � 5) 9 Y DRIVE Assy
9 8
Front Case 50 (P)
�2
8
�2
2 3 4
Loosen a rivet. Remove the Lead Cover (P). Pull out a Flexible Cable.
1
�3
9 8
�2
8
�2
8
2
Lead Cover (P)
4
Rivet 3 Turn it not to press the rivet. (Because when the rivet presses, Lead Cover (P) fit in once again.) It is easy to remove when pull out the Lead Cover (P) with the rivet before completely removing the rivet.
5 6
Remove bottom by the fulcrum at the top of Front Case 50 (P). Remove the Front Case 50 (P).
10 Reverse the SCAN (A) and SCAN (B) Assemblies. 11 When it is necessary, exchange the ROM.
SCAN (A) Assy
Front Case 50 (P) ROM �6 Rear Case
6
Aluminum Materials It is the structure that a hook of Front Case 50 (P) was put between with Rear Case and aluminum materials.
10
10
5
SCAN (B) Assy
87
|
