|
There are currently no product reviews.
 ;
Hi, thankyou for providing the Nordmende Globetrotter original manufacturer's repair manual. Quality is very good and sharp - the PDF file was comfortably small to download. The only question is: why did it take so long to become ready for download?? Many thanks anyway, I fixed the fault in the radio thanks to the circuit.
regards: Nick
 ;
This was super service.Ordered this manual and was reading the download an hour later
 ;
as always, rapid and efficient, very good and clear prints
details clearly visible keep going this way!!!!!!
 ;
I expect a wonderful result as alaways!!!!!!
Usually is much faster....
 ;
Wow very wonderful and clear!!!! I will always trust them
1
2
3
4
A
No sound from the speakers (2/2)
A
Is it sound for every function that doesn't come out? No Has the signal arrived at CN8657? (23), (27)
B
No Has the signal arrived at CN8657? (31), (35) No Is a signal output from IC8002?
Check the flexible cables Yes between the AV BOARD Assy and MAIN BOARD Assy and between the MAIN BOARD Assy.
Yes Replace TUNER BOARD ASSY.
Check around IC8002 and No check the communications between IC8002 and the microcomputer.
Yes
C
Has the signal arrived at TP8662 and TP8669?
45 46
Yes Has the signal arrived at TP3512 and TP3513?
Check around IC8003, No check the buffer circuits and check the TUNER BOARD ASSY.
No Check the cable between the AV BOARD Assy and AUDIO AMP Assy.
47 48
Yes
D
Has the symptom been settled when the system cable is replaced? Yes
No
Replace AUDIO AMP ASSY.
Finishing troubleshooting
E
F
148
1 2
PDP-5050SX
3 4
|